BS 6004 Insulated Compound PVC Granules For 450 / 750V Non Armoured Cables

Product Description

BS 6004 PVC Insulated Compound Granules for 450/750V Non-Armoured Cables

 
PVC compound in different colors depends on customer requirements.
Density and hardness, Temeperature resistance all can be comstomized. Can meet different country standard like BS, UL,SEA,lead free and so on
 
Soft PVC cable insulation compounds
 
PVC cable mass is usually compounded in two stages: hot/cold mixing in the powder phase, followed by compounding and pelletizing on a Co-Kneader.
Compounding requirements can be summarized as follows. The plasticizers and other constituents like stabilizers, additives, fillers, reinforcements, flame retardants and others. are absorbed in the porous PVC grain and then must be systematically gelled, dispersively and distributively mixed, and agglomerated. This is all in compliance with well defined temperature limits. Custom-tailored property profiles lead to a wide variety of formulations, with efficient production in rather decreasing batch sizes.
Our PVC compounds for wires & cables are complied with RoHS,Reach,UL, we have directed customers to use our RoHS Reach compliant products for their wires and cables to protect the environment.
 

 
1.Technical Specifications
 
【1】Technical specifications of 70 ℃ pvc compound

 
3.Process: extrusion
 

 
4.Appearance: cylindrical particles, plastication should be good, the color and luster is even, without obvious impurity.
 
5.color: Black and white, gre for Shealthing PVC compound
             Red, Yellow, Blue, White and black for Insulation PVC compound
 
6.Packing: Jumbo bag, 18-20 Tons per 20GP, 26 -27 Tons per 40GP
 

 
7. Transportation and storage:
  After unpacking should be run out as soon as possible, or temporarily stored in sealed containers,
  to avoid the absorption of moisture in the air
  Store in a well-ventilated place, away from direct sunlight
  Keep away from heat, ignition sources, combustibles and incompatible materials
  The storage area must be cleaned and properly structured to avoid dust accumulation
 
8.Factory Introduction:
 
Our factory is located in Shangyou industrial zone, Shangyou country,Ganzhou city,Jiangxi province, and setting up sales office and warehouse in Dongguan city. The new and standard factory is built on 40,000 sq. mtr with a total annual capacity of approximately 10,000 tons of various products,covers 2 flame retardant production-line, 7 cable filler yarn production-line,32 twisted machine, with full modernization of testing equipment. All of the products can be exported freely.
The company has passed the ISO 9001:2008 quality system certification. Each of these products can reach to environmental requirement by SGS company: such as ROHS, REACH-SVHC, Halogen Free. More than 30% of products are exported to Europe, America, Japan, Southeast Asia and Africa, having cooperation with many well-known listed companies at home and abroad.
We always sincerely welcome any domestic and overseas customers with great enthusiasm.
 

 
9.How To order :
 
1. Let me know the models, specification, quantities, colors you want to order
2. We will email you the Proforma Invoice based on your order information
3. Kindly check the PI, everything is ok, we will start production as soon as receiving payment deposit or LC, then
deliver the goods on request, original documents will be send against full payment